+39 (0) 30 21 20 448 Mon - Fri 08:00 - 17:00 29/A, Via Santellone - Molinetto di Mazzano (BS) - Italy
+39 (0) 30 21 20 448 Mon - Fri 08:00 - 17:00 18, Via Statale - Calcinato (BS) - Italy
ISO 9001:2015
according GMP
#40 years
experience in plastic
Get A Quote

PA6G+MOS2 (Cast Polyamide 6 filled Molybdenum Disulphide)

Polyamide 6 Cast filled with Molybdenum Disuphide, better known as PA6G+MOS2, is basically comparable to natural PA6G.


As said before, all main characteristics of PA6G are equal in PA6G+MOS2. The addition of MOS2 brings about an increase in the degree of crystallinity, lending the cast polyamide a higher degree of strength, but without any appreciable deterioration of toughness.

In addition, increasing the crystallinity of this PA6G results in improved surface hardness and better abrasion properties compared to standard Polyamide 6 cast.

PA6G+MOS2 is available in Black and Anthracite colours, which assure a better performance when applications under UV rays is required.

Chemical resistance.

Polyamide 6 Cast filled with Molybdenum Disulphide has the same chemical properties of PA6G. You can find more detailed info on tecnichal page of PA6G.

Miscellaneous information.

Find out with our experts if you really need a PA6G filled Molybdenum Disulphide or just a Black PA6G. You could save many money!

PA6G+MOS2 most famous brand name.

Polyamide 6 cast filled MOS2, usually available in rods, tubes and plates, also in huge dimensions, is produced by different Companies, each one with its own commercial name. Although that, each PA6G+MOS2 has more less the same characteristics and can easily substitute one each other.

Most famous brand names are:

  • Linnotam® MOS;
  • Zellamid® 1100 MO;
  • Nylatron® GSM;
  • Lamigamid® 314;
  • Tecast® T MO;
  • Sustamid® 6G MO.

PA6G+MOS2 in few words.

Special properties:

  • High cristallinity;
  • Good UV resistance;
  • Good hardness and stiffness;
  • Very good sliding properties;
  • Very high abrasion and wear resistance;
  • High mechanical strength coupled with high impact strength.

Used in:

  • Transport and conveyor;
  • Material handling;
  • Construction;
  • Automotive and Garage equipment;
  • Offshore;
  • Food Industry;
  • Steel Industry;
  • Waste Management.


  • Sliding parts;
  • Wear components;
  • Ball bearing races;
  • Friction bearings;
  • Pulleys;
  • Bogies;
  • Rope pulleys;
  • Sheaves;
  • Rollers;
  • Wheels;
  • Gears.