+39 (0) 30 21 20 448 Mon - Fri 08:00 - 17:00 29/A, Via Santellone - Molinetto di Mazzano (BS) - Italy
+39 (0) 30 21 20 448 Mon - Fri 08:00 - 17:00 18, Via Statale - Calcinato (BS) - Italy
ISO 9001:2015
according GMP
#40 years
experience in plastic
Get A Quote


Everything you want, with plastic.
Machined plastic for industrial market

Machined Plastic for: Industrial market sectors in general

Plastic materials can be found in almost every industrial application and not only in listed market sectors. In addition to our standard products portfolio, we are able to realize whatever shape required by our customers, even if the request comes from sectors where our knowledge is not so huge. We supply machined plastic for industrial market in general.

New challenges are always well accepted; our experienced staff will appreciate the possibility to express creativity and to help you to reach the highest target.



Flame retardant materials (which satisfy UL 94 – V0), high precision components with small dimensions and tight tolerances.

Oil & Gas

Thermoplastic materials with high temperature range and compression strength, everything supplied with full traceability and with many different documents and certifications.


Cheap components with a long life-time. Moreover due to the different dimensions of production, a great design freedom can be achieved when choosing plastic materials.

Renewable energies

When it comes to green technologies, wind turbines or solar panels, components made of plastic can help to reduce wear, weight and centrifugal forces.


Far away from the nowadays delocalized textile production plants, there was a time when most important textile machineries producers were located in North of Italy. D.H. Lamina has always been a major player inside the supply chain. Number of industries specialized in this sector is now much less but we still keep competences.

Water treatment

Water treatment machines require components with low water absorption and great chemical resistance. These characteristics are greatly achievable inside a good range of thermoplastics and fluoroplastics polymers.


 You probably do not expect that behind mechanism of tapis roulant or multifunctional racks there are plastic components which can be obtained from turning or milling. Great mechanical strength, dumping of noises and excellent friction are just few of properties assured by our materials.

Why using Engineering plastic materials for Industrial Applications in general?

Choosing thermoplastic materials for industrial applications means choosing an incredible balance of properties. As indicated in our page ‘’Engineering Plastic’’ we can count on many advantages: for example weight reduction, resistance to wear, good vibration absorption, great chemical resistance and good machinability. When you choose plastics, you are doing a good for money choice too.

Thermoplastic materials for Industrial Applications

Considering the applications indicated above most suitable plastic materials are indicated in the table below. 

Please click on the name of the material to be addressed to the ad hoc page. 

DIN 7728DescriptionGroup
PA6Polyamide 6PA
PA66Polyamide 66PA
PA6+MOS2Polyamide 6 + Molybdenum DisulphidePA
PA66+MOS2Polyamide 66 + Molybdenum DisulphidePA
PA66 GF30Polyamide 66 + 30% Glass FiberPA
PA66 + PEPolyamide 66 + Polyethylene PA
PA6GPolyamide 6 CastPA
PA6G+MOS2Polyamide 6 Cast + Molybdenum DisulphidePA
PA6G+OILPolyamide 6 Cast + OilPA
PA6G-SLPolyamide 6 Cast + Solid LubricantPA
PA6G FRPolyamide 6 Cast Flame RetardantPA
PA6G HSPolyamide 6 Cast Heat StabilizedPA
PA12GPolyamide 12 CastPA
HD-PEHigh-Density Polyethylene (300)PE
HMW-PEHigh Molecular Weight Polyethylene (500)PE
UHUHMW-PEMW-PEUltra-High-Molecular-Weight Polyethylene (1000)PE
PE-UHMW ELSUltra-High Molecular Weigth Electroconductive PolyethylenePE
REG. UHMW-PERegenerated Ultra-High Molecular Weight PolyethylenePE
PEEKPolyether ether ketonePEEK
PEEK-SLPolyether ether ketone + Solid LubricantPEEK
PEEK CF30Polyether ether ketone + 30% Carbon fiberPEEK
PEEK GF30Polyether ether ketone +30% Glass FiberPEEK
PETPolyethylene terephthalatePET
PET-SLPolyethylene terephthalate + Solid Lubricant (PTFE)PET
POMCPolyoxymethylene CopolymerPOM
POMC SLPolyoxymethylene Copolymer + Polyethylene POM
POMHPolyoxymethilene HomopolymerPOM
POMH SLPolyoxymethylene Homopolymer + Solid Lubricant (PTFE)POM
POMC ELSPolyoxymethylene Copolymer ElectroconductivePOM
PTFE CG25Polytetrafluoroethylene + 25% Carbon-GraphitePTFE
PTFE BR60Polytetrafluoroethylene + 60% BronzePTFE
PTFE GF25Polytetrafluoroethylene + 25% Glass FiberPTFE
PTFE ELSPolytetrafluoroethylene ElectroconductivePTFE
PTFE TFMModified PolytetrafluoroethylenePTFE
PPSPolyphenylene Sulfide PPS
PPS GF40Polyphenylene Sulfide + 40% Glass FiberPPS
PPS-SLPolyphenylene Sulfide + Solid LubricantPPS
PPS GF SLPolyphenylene Sulfide + Glass Fibre + Solid LubricantPPS
PVDFPolyvinylidene fluoridePVDF
PP-HPolypropylene HomopolymerPP
PP-H ELSPolypropylene Homopolymer Electro ConductivePP
PVC-UPolyvinyl Chloride unplasticized (rigid)PVC
PMMAPolymethyl MethacrylatePMMA

Portfolio: machined parts for Industrial Applications

Why working with D.H. Lamina for your plastic parts for industrial applications

D.H. Lamina aims to be a lighthouse in the dark ocean of plastic materials.

A production company who can offer a full range of machining, to assure you just a unique speaker.

A wide range of semi-finished materials, made in EU, with superior quality when it comes about friction, wear, mechanical, electrical, and thermal properties, to satisfy your wish to be the best.

A young but experienced team, always at your disposal: sales, purchasing, financial and technical assistance, you’ll never walk alone.

When it comes about plastic parts, no matter which kind of industrial applications, choose a unique interlocutor, able to satisfy all your needs. D.H. Lamina places its passion as added value of your entire supply chain.

Find out more surfing our website or contact our experts here.